GM G80 Gov-Lock 9.5″ 14 Bolt Late Differential Complete Clutch Kit

Description

You are buying a GM replacement clutch plate set for all GM 14 Bolt 9 1/2 inch locking differentials, later (newer) model years.

• These are the later design clutch plates that have increased surface area for more apply and are much better than the earlier versions
• These WILL NOT FIT ‘regular’ Eaton limited slip or posi units.
• The energizing disc is carbon fiber lined for years of trouble free service
• You get both clutch pack kits, everything that is pictured which is enough for one differential
• These are the same clutch pack kits that we use in our rebuilt differentials
• In most cases the internal clearances will have to be reset and the internal shimming will have to change
• NOT for the Eaton style spring pre-loaded or “S” spring style posi units

If your Gov-Loc is failing to unlock, popping in corners, making strange noises or acting funny it may be time for new clutches.  As the clutches in these units wear out, especially the thin or RHS, the ramp plate must over travel to achieve lock.  When this happens, it can get stuck in the locked position and catastrophic damage will result.

In addition, if it does not lock or has been abused, the fuse disc may be stripped or the governor assembly may be damaged. The fuse disc is included with the LHS clutch pack

Replace your clutch packs – NOT your differential.