Cast iron shim installer
GM Ford 10 Bolt Carrier Cast Iron Factory Stock 2.890″ Shim Driver or Installer
You are buying a tool that is used to install the factory cast iron shims back into the housing during a differential service or gear change. Only for use with bearing races that have a diameter of 2.890” (such as LM501314). No more hunting for that flat screwdriver or large punch, this tool greatly reduces the chance of cracking the factory shim.
NOTE: You still must ensure that the races are square in the housing prior to installing.
- 1972-1998 GM 8.5 10 bolt
- 1982-2005 GM 7.5 / 7.625 10 bolt
- Ford 7.5 10 bolt
- Manufactured using 3/16 steel and is made in USA
|Dimensions||6 × 4 × 4 in|